A few seconds only. It’s a locking mechanism that can be easily clipped and unclipped.

Yes, however this becomes a custom made integration. A budget needs to be evaluated and discussed prior. It is evaluated separately than the existing configurations.

Yes, depending on the configuration.

Yes. If you don’t need to use the lidar then you can fly without the lidar and take advantages of the high performant INS.  We also provide all the internal and external orientation parameters (EOPs, IOPs). Using the combination of your IMU with the camera calibration profile, you can create a very accurate orthophotos without the need to us ground control point in your photogrammetry processing. Use them just as check points !

Yes. You can deploy Connectiv on land or marine vehicles with Adaptiv mobile mapping solution.

Yes, a thermal/infrared camera and a 10-band multispectral camera are available as camera module options that can be configured on the Connectiv sensor.

The Connectiv can be adapted to a multitude of drones as the solution is completely independent. It has its own battery, INS, Lidar and camera. You can therefore mount it on any drone that can carry the payload weight.

It is not recommended to fly the lidar in the rain. The rain will affect the quality of the data. No lidar systems should be operated in the rain.